Panels come in aluminum and Cor-Ten (weathering steel) for exteriors and interiors. Cold rolled steel & hot rolled steel interiors only.
Aluminum: .125 / .160 / .187 / .25
Cor-Ten Steel: 10 ga. / 12 ga. / 14ga.
Depending on product type and structural requirements.
It is product dependent. Refer to the typical sizes for each standard product. Guardrails and fences are typically 4’ width max. Oversized sheets are available, but there is an added cost, and potential engineering limitations.
Our systems are designed to reduce or eliminate secondary structural support. Our brake-formed return flanges on panel edges increase the structural integrity of the panel face and gives the optimal hardware attachment point. We have pre-designed/engineered brackets for mounting formed panels. Please see the standard product pages for details and corresponding bracket type in downloadable product sheet.
The most popular finish we provide is architectural rated powder coating that complies with AAMA 2604. Typically a 2-coat process, primer plus color top coat, and available in a wide array of standard pallet colors from various industry suppliers. Standard finishes come with a 5 year color and gloss warranty.
We also offer AAMA 2605 Fluoropolymer finishes in either powder coat or liquid applied (Kynar or equal). Color matching is available in liquid applied Kynar. Limited 10 to 20 year warranties are available. Some colors may have extended lead times.
Anodize finish options include clear and dark bronze only.
After the final shop drawing approval, with final field verification, it is approximately 5-7 weeks with powder coating; 7-8 weeks with Anodize or Kynar finish.
BOK Modern is material supply only, but in California and some US metro areas, we can provide a list of preferred installers. Please inquire.
Our products are very easy to install. We can work with your installer or miscellaneous metal team by walking them through the installation methods via video call or conference call. See installation videos found on each product type page.
Please provide all relevant drawings (plan, elevation, section, detail, etc.) and specs (material, thickness, finish, and pattern) to ensure the most accurate estimate. Please note that we cannot provide a final estimate or go into contract until a 100% CD plan set is provided. Our estimate lead time is approximately 5-10 business days depending on the complexity of the project.
Please provide your SD or DD package for a ROM number. This has a much faster lead time.
Yes, currently we have a $15k minimum order, and this equates to at least 4-6 full size panels typically.
Due to our large pattern library, we don’t stock samples of every pattern. Please inquire about a pattern you like and we can propose a similar one we have in stock.
We can produce made to order samples in one of our standard patterns, or in a custom pattern (.DXF vector file required) at 24”x 24” with pattern at full scale. Made to order samples are $250 unfinished and take approximately 2-3 weeks, or finished in a standard stock color for $400 in approximately four weeks.
Yes, you can order color chips. Please note that lead time for each color sample is as following:
– Powder Coat from preferred suppliers: 3-5 days for in stock* (up to 3 color selections)
– Fluoropolymer**: 10-15 days (up to 3 colors in PPG / Duranar / or equal)
– Anodizing: 5-7 days (for clear or bronze anodize)
* Out of stock colors may have to be sourced from the supplier with 10-20 day lead times.
** Custom colors paint chips will be provided when needed for contracted projects.
Please contact BŌK Modern if you need special samples ordered for a specific project.
We provide design-assist service during the estimating phase, including design charettes and technical and pricing exercises. We provide a design contract for projects that require more extensive design exploration for a longer period and for highly custom projects. Design contracts may also be required for engineering situations outside of typical conditions. Please inquire for a design contract assessment of your project.
Please inquire with us to setup a design consult or zoom charette.
Cost effective projects make the most practical use of raw material sheet sizes. Configuring panel sizes that include face and edge forming to fit standard sheet sizes while satisfying engineering requirements can avoid excess waste.
Standardizing panel types as much as possible can save on design and documentation time. More units of fewer types drives cost down. Use a standard pattern and panel repeat vs. a continuous custom pattern image with many one-off panels. Each change in panel type, face size, variation in pattern, or edge detailing creates added panel types resulting in added costs.
Simple geometric shapes and moderately sized openings are more efficient to cut. Please see pattern library for our standardized patterns or contact BŌK Modern to talk you through guidelines for designing a custom, cost effective pattern.
Panels with the exact same features (size, material, forming, finish, color, pattern layout, orientation, etc.) are considered the same ‘type’. Changes in any panel feature will result in a different panel type. More panel types equates to more hours for shop drawings and programming for fabrication resulting in higher costs.
We have lines of standardized products with pre-engineered details and mounting brackets. Our standardized product lines are:
– Guardrails
– Façade Cladding
– Canopies
– Shades
– Fence
– Products
Yes, and they are linked below:
Yes, and there are examples of custom projects below, and BOK Modern is happy to provide design consultations or charettes, and cost estimates. We can engage in Design Contracts to work out custom engineering and details, or pattern development.
Yes, each product line has pre-engineered details and panel dimensions. Staying within the guidelines will reduce custom engineering and material costs.
On each pattern’s page, the rough scale of the pattern is shown by the human figure behind the panel. We can provide the pattern CAD file upon request for design development per standard dimensions. It may be possible to scale patterns up or down to the client’s liking, but consult with BOK Modern for any limitations. Scaling a pattern down to have more numerous and smaller perforations does increase the cost.
Yes, all stock patterns can be flipped, mirrored, rotated, and even scaled. Scaling patterns down does add cost due to longer machine time processing. Not all patterns can be scaled.
Yes, please send us a .DXF of the vector work (arcs- not splines or polylines). We will then evaluate it for pricing, and advise on needed alterations when appropriate.
It depends on the pattern. If the custom pattern requires added laser time, the cost will increase. In many cases custom patterns do not add cost. If we are unable to fabricate the custom pattern provided, we would recommend ways to make it work by providing our fabrication guidelines. If you do not have a .DXF of the vector work, our design team can create this file, but as an added design service cost.
Patterns are priced according to production run time. Limited perforation patterns are less expensive. More intricate patterns cost more. The delta is usually a 20% difference between simplest and most complex.
The minimum perforation size needs to be at least 2x the material thickness. So, 3/8” opening on 3/16” material. There is no max perforation size, except where code dictates – e.g. 4” sphere rule for guardrails. The webbing or material between perforations also needs to be 2x material thickness or greater for strength and to reduce deflection on the panel face. Long slots that cross most of a panel face can weaken the panel and may not be workable without modifications to ensure panel integrity.
Simple patterns that have a standard, geometric design are the least expensive when laser-cut. Examples are: A18, B9, and B21.
We cannot guarantee that any of our patterns are not climbable. However, we can suggest vertical patterns with fewer openings that are less conducive to climbing. While each jurisdiction will have its own unique code, we are often able to alter a pattern from our library that would discourage climbing. Scaling down with more perforations may increase the cost of fabrication.
Sometimes code requires a 50% opening. Pattern information on our website indicates approximate percent open area. Some standard and custom patterns may be altered to achieve a 50% opening by altering the size and spacing of perforations.
For all patterns contained on the panel face, the minimum solid border or margin is 3/4” all around.
It is possible for some patterns to eliminate the borders and bleed the pattern around the formed edge of the panel for a seamless look. Consult with BŌK Modern for any limitations.
Each pattern page shows the approximate % of open area for the selected pattern. If you like a specific pattern and would like more % opening, some customization may be possible. Code compliance factors may limit modifications. A 4” maximum opening for balcony guardrails or long slots that allow too much deflection of the panels are typical limitations.
RUSS NAYLOR
Co-Founder
[email protected]
Russ Naylor has over 30 years of experience as a licensed architect and contractor.
After graduating with a Masters in Architecture from UCLA, Russ began his career in Los Angeles before moving to San Francisco to work first with Skidmore, Owings & Merrill and then Ai+Architecture.
As a talented and driven architect, Russ became a partner at architecture firm NC2 Studio, where he focused on designing large-scale and mixed-use commercial, retail and multi-residential projects. His designs continue to shape the city’s skyline today.
Russ is now a founding partner at BŌK Modern, where he leads the industry in reimagining architectural metal systems. At BŌK, Russ focuses his skills on design and product development and continues to revolutionize the field.
As an inventor and problem solver, Russ’s design approach is steeped in a realistic understanding of the key components of the development process. This realistic understanding, combined with his creative flair, has allowed him to create groundbreaking products that are both practical and beautiful.
HEDDIE CHU
Heddie Chu has over 20 years of experience managing and operating design firms and institutions both domestically and internationally.
Heddie began to feed her passion for design at the Parsons School of Design and New York University, where she studied fashion design and communication design in both New York City and Paris.
After her studies, she began her career in New York City where she flourished as a designer. Heddie quickly rose to prominence as a designer and an art director for a number of high-profile companies, including fashion designer Giorgio Armani, the Martha Stewart LIVING magazine and advertising firm J. Walter Thompson. She has been a professor of Communication Design at the Parsons School of Design and the California College of the Arts.
During her time at the Parsons School of Design, where she received her BFA, Heddie established affiliate schools in South Korea and Malaysia, leading the development of their design curriculum and creating the operations infrastructure for the school in those countries.
As a partner of architecture firm NC2 Studio, Heddie skillfully led the interior design division and managed business development and operations.
Today, as a founding partner of BŌK Modern, Heddie drives business development and operations with sophistication and efficiency.
BŌK Modern can provide a simulation of our pattern on your project through advanced 3D renderings.
Submit the form below for more information on pricing and lead-times:
Every project begins with a vision and we are passionate about making your vision a reality.
At BŌK Modern, we pride ourselves on our proven track record of skillfully designing and fabricating custom projects with our clients – we have done everything from standard to complex. Our ability as creative problem solvers is unmatched in the field.
Through our Design Support process, our diverse team of experts, with their combined knowledge in multiple fields, will work diligently to identify pitfalls before progress stagnates.
Headed by Russ Naylor, who has been making his mark on San Francisco’s skyline for decades, our dedicated Design Team is comprised of product designers, engineers, and architects. Together, we have many years of expertise and knowledge upon which to draw.
During our Design Support collaboration process, our Design Team will work with the architect, installers, GC’s and engineer of record to conduct a pre-assessment of the engineering for each project. We are often able to identify and remove unnecessary support substructures and to suggest novel applications for our modular systems.
With your help, we are able to seamlessly streamline construction and improve both buildability and sustainability. This process allows BŌK to provide a more accurate estimate of final costs compared to a typical ROM estimate and result in considerable cost savings when compared to conventional construction methods.
Our design approach is steeped in a realistic understanding of the key components of the development process. By getting involved early, our goal is to make installation as simple and efficient as possible and to fine tune the project budget so that a reliable and accurate cost for your clients. We are able to achieve all of this while respecting and preserving the integrity of your design intent.
We offer this service at no charge for simpler projects. For more complex projects, we provide a Design Contract to formalize this process and provide a firm cost for your client. Our Design Team is available to collaborate with you every step of the way. Any costs for this service will be credited back to your project once it becomes active.
From aspiration to inspiration to reality, we will be there every step of the way.
LEARN MORE BY CALLING 415-749-6500 x 295 OR SENDING US AN EMAIL.
Heddie has 20 years of experience working with national and international design firms and design institutions. Her experience enables her to lead Naylor & Chu with operational sophistication and efficiency.
Heddie began her career in New York City as a designer and an art director for several prominent companies including Georgio Armani, Martha Stewart LIVING Magazine, and J. Walter Thompson Advertising.
Internationally, Heddie found sponsors and investors to establish affiliate schools for the Parsons School Of Design New York in South Korea and in Malaysia. She lead the operations and marketing side of the program.
Heddie’s passion for the design business supports her leadership in developing comprehensive business, marketing and operations plans, as well as utilizing her network skills to create the right support for the projects and Naylor & Chu.
HEDDIE CHU